Decanting The Fuel From The Jerry Can Into The Ecosmart™ Burner - EcoSmart Fire One Bedienungsanleitung

How to operate the EcoSmart™ Fire
Downloaded from www.Manualslib.com
Decanting the fuel from the Jerry Can into the EcoSmart™ Burner.
When filling the EcoSmart™ Burner, only fill through the designated filling point.
The EcoSmart™ Burner must be at room temperature. If the Burner has been in use and needs re-filling,
please wait 30 minutes after the flame has died before filling.
2
1
4
5
6
8
manuals search engine
1. Position the slider mechanism setting so the chamber is fully open.
2. Inspect burner to ensure it is clean and clear of any foreign
particles.
3
3. Access the filling point by swivelling the small round plate which is
located in the bottom right corner of the burner.
XL Burner: The XL Burner features a Spring Loading Cap. It
is engineered so that the Jerry Can spout is fully
enclosed prior to releasing the fuel supply, thus
allowing filling at a high rate, whilst eliminating
splashing as the fuel is being decanted.
Around Burner: To fill the Around Burner, position the Jerry Can Spout
in the middle of the Burner mouth.
4. Re-position the burner slider ensuring the grid work of the burner
is visible through the filling point. This will clear the filling point
for the insertion of the Jerry Can Spout as well as allowing visual
monitoring of the amount of fuel being added, according to the
volume markings on the EcoSmart™ Burner.
5. Once ready, carefully place the Jerry Can Spout inside the filling
point. NEVER fill over the maximum level as indicated on the
burner vent inside the EcoSmart™ Burner and only fill to the level
that you require for burning time.
6. Use both hands to pour. Place the palm of one hand on the top of
the nozzle with your thumb on the green button.
Use your other hand to tip the can vertically and hold it steady.
Press down on the green button to release the fuel. To stop the
flow, simply release the green button.
7. When filling is complete, swivel the plate that covers the filling point
so it closes the filling point.
7
8. Re-position the slider to the fully open position. Check surrounding
area for any spillage.
Make sure that the Jerry Can is at least 1500mm [59.1in] away from
the fireplace before you ignite the fire.
ENGLISH
www.ecosmartfire.com 16