How To Operate The Burner; Regulatory Information For The Safe Handling And Storage Of E-Nrg Bioethanol; Decanting Your E-Nrg Bioethanol Into The Jerry Can - EcoSmart Fire BK-Serie Installations-, Bedienungs- Und Wartungshandbuch

How to Operate the Burner

Follow these instructions to operate your Burner safely.
WARNING: e-NRG Bioethanol is a flammable liquid. Store only
in original container or Jerry Can. Store away from all sources
of ignition, including pilot lights. Check your local laws and
regulations for proper handling and storage.
Regulatory Information for the Safe Handling and
Storage of e-NRG Bioethanol
Purchasing your e-NRG Bioethanol.
e-nrg Bioethanol is the onLy fuel to be used in this appliance.
to order your e-nrg fuel contact:
Australia
Visit - www.e-NRG.com.au
call - 1300 003 NRG
uSA
Visit - www.e-NRG.com
call - (888) 670 ENRG
or contact your local ecoSmart fire distributor.
e-NRG Bioethanol is classified as a Dangerous Goods Flammable Liquid
Class 3, PGII and is regulated by specific standards and rules. You must
familiarise yourself with the appropriate regulations of your country in
order to safely and legally store, handle, decant and use this fuel.
e-nrg Bioethanol containers are recyclable and should be disposed
of accordingly.

decanting your e-NRG Bioethanol into the Jerry Can

To view a video of fuelling your Fire, visit our website at
ecosmartfire.com and click on Fire Safety.
decanting must be performed in a well-ventilated area to ensure that
any spillage is easily contained and away from any ignition source.
NOTE: Never fill the burner using a vessel that does not have the
Spill Proof Safety Spout attached.
The burner can ONLY be filled following one of the two methods
outlined below.
A. USING THE JERRY CAN
INCLUDED WITH THIS
BURNER:
1. remove the nozzle from your
Jerry can.
2. carefully decant the fuel from
the bottle into the Jerry can
through its opening, avoiding
spillage (you may need to decant multiple bottles depending on the
packaging volume purchased). if spillage occurs, clean thoroughly
before proceeding. (refer to troubleshooting on page 20).
3. re-screw the cap tightly back onto the Jerry can to contain fuel and
avoid accidental spillage.
4. test that it is closed securely before moving away from your
decanting area.
5. you are ready to approach the Burner.
B. USING THE e-NRG
FUEL BOTTLE:
1. remove the cap from the fuel
bottle.
2. Attach the adapter to the fuel
bottle.
WArning: fuel containers
without flame arresters, if used
improperly, can result in the
inflammation of the fuel within
the container, which may cause
personal injury or property
damage. Never fill the burner
directly from the e-nrg bottle,
risk of explosion.
3. Attach the Spill Proof Safety
Spout to the adapter. test
that it is closed securely
before moving away from your
decanting area.
4. you are ready to approach the
Burner.
© Copyright 2004 - 2018 The Fire Company Pty Ltd. All rights reserved. V0318