Product Features; Inserting/Replacing The Battery - Bosch DLE 40 Professional Originalbetriebsanleitung

OBJ_BUCH-811-001.book Page 17 Thursday, July 31, 2008 9:46 AM

Product Features

The numbering of the product features shown
refers to the illustration of the measuring tool on
the graphic page.
1 Reference level button
2 Memory retrieve button "M="
3 Memory add button "M+"
4 Area measurement button
5 Length measurement button
6 Display
7 Alignment aid
8 Laser warning label
9 Button for measuring and continuous
measuring
10 Volume measurement button
11 Memory subtraction button "M – "
12 Button for changing the unit of measure
13 On/Off and memory delete button
14 1/4" thread
15 Latch of battery lid
16 Battery lid
17 Serial number
18 Laser beam outlet
19 Reception lens
20 Tripod*
21 Laser viewing glasses*
22 Laser target plate*
23 Carrying strap*
24 Protective case
*The accessories illustrated or described are not
included as standard delivery.
Bosch Power Tools
Downloaded from www.Manualslib.com manuals search engine
Display Elements
a Measured values stored
b Measuring functions
Length measurement
Tracking (continuous measurement)
Area measurement
Volume measurement
c Battery indication
d Temperature indicator
e Measured value/result
f Unit of measure
g Measurement reference level
h Laser switched on
i Individual measured value
(for length measurement: result)
Assembly

Inserting/Replacing the Battery

Use only alkali-manganese or rechargeable bat-
teries.
Fewer measurements are possible when using
1.2 V rechargeable batteries as compared with
1.5 V batteries.
To open the battery lid 16, press the latch 15 in
the direction of the arrow and remove the battery
lid. Insert the batteries provided. Pay attention to
the correct polarity of the batteries according to
the representation in the battery compartment.
When the battery symbol appears in the dis-
play for the first time, then at least 100 measure-
ments are still possible. The batteries must be
replaced when the battery symbol flashes; taking
measurements is no longer possible.
Always replace all batteries at the same time.
Only use batteries from one brand and with the
identical capacity.
Remove the batteries from the measuring
tool when not using it for extended periods.
When storing for extended periods, the bat-
teries can corrode and discharge themselves.
2 609 140 583 | (31.7.08)
English | 17