Switching The Stop+Go Function On And Off; Using The Automatic Warm-Up Function - AEG Electrolux 88101KF-N Montage- Und Gebrauchsanweisung

Switching the STOP+GO function on and off

The STOP+GO function simultaneously switches all cooking zones that
are switched on to the keep warm setting and then back to the heat
setting that was previously set. This function can be used to briefly in-
terrupt and then continue the cooking process e.g. to take a telephone
call.
3
Timer functions are not stopped by STOP+GO.
3
STOP+GO locks the whole control panel except the sensor field

Using the automatic warm-up function

All cooking zones are equipped with an automatic warm-up function.
The automatic warm-up function sets the cooking zone to the highest
setting for a certain period of time and then automatically switches
back to the cooking setting that was originally set.
3
If during the automatic warm up
e.g. from
3
If there is still residual heat on the cooking zone (display
matic warm up is not performed.
36
Downloaded from www.Manualslib.com
Control panel
To switch Touch STOP+GO
on
To switch Touch STOP+GO
off
Step Control panel
1. Setting the level
2. Place to one side for a moment
3. touch
4. touch in order to set the de-
sired cooking setting
Á Ã
to , the automatic warm up is adjusted.
manuals search engine
Display
u
heat setting that was previ-
ously set (not automatic
warm up function)
Display
Ç / p Ç
Ç
a
Æ
after 3 seconds
a
a higher heat setting is selected,
.
p
/
p
/
¿ u
until /
a
h
), the auto-