Driving Mode; Parking Mode - BMW Advanced Car Eye 2 Bedienungsanleitung

General information about the product:
•
–
Operating manual
–
Data protection
–
Conditions for use
–
Legal notice
–
Licences
–
Software
If the speed indicator is active, excess
speeds may be documented in the
recorded media data.
If the rear camera is not fitted because
the car is a convertible or for other
technical reasons, the front camera must
be selected in the ACE 2.0 app in the
camera selection menu.

Driving mode

You can set the recording type and threshold
value (sensitivity) of the vibration sensor (G
sensor) for driving mode.
Recording types:
Recording depending on situation (G
•
sensor):
Trigger in the event of vibration (for example
accident) or heavy deceleration (emergency
braking)
Permanent recording
•
G sensor threshold values:
1: Minimum sensitivity (maximum threshold
•
value)
5: Maximum sensitivity (minimum threshold
•
value)
Please check at regular intervals whether
permanent recording in driving mode
is legal in the country in which you are
located.
42

Parking mode

You can select and set the monitoring sensors
and the thresholds (sensitivities) for parking
mode.
The times for the entry and exit phases can also
be set.
Monitoring sensors:
Proximity sensor (radar sensor) ON/OFF
•
Vibration sensor (G sensor) ON/OFF
•
Radar sensor threshold values:
1: Monitor the direct vicinity at the front/rear
•
of the car
3: Monitor the extended area at the front/rear
•
of the car
G sensor threshold values:
1: Minimum sensitivity (maximum threshold
•
value)
5: Maximum sensitivity (minimum threshold
•
value)
The threshold values in parking mode
have a higher sensitivity level than in
driving mode.