Herunterladen Inhalt Inhalt Diese Seite drucken

Gps Function; Manual Recording Of Videos And Photos; Car Location - BMW Advanced Car Eye 2 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
The energy consumption and therefore the
duration of possible monitoring depends on the
activity of the ACE 2 in parking mode and on the
condition of your car battery.
Please check the condition of your battery
and the maintenance instructions in your
car's owner's manual.

GPS function

The GPS function is not permitted in
all countries for legal reasons and may
therefore be restricted or completely
disabled in some countries.
Please familiarise yourself with the
statutory regulations in your country
before starting to use the ACE 2.
For further information, see section
"Settings".
Manual recording of videos and
photos
It is also possible to record videos and photos
manually.
Pressing the Power button on the front camera
will start a manual recording in driving mode or
during the exit phase.
You can choose between a photo and a video
sequence in the settings menu in the ACE 2.0
app.
Length of video sequences:
Driving mode: 60 seconds
Parking mode: 20 seconds
You can also start recordings manually using the
ACE 2.0 app on your smartphone.
Using its internal memory module, the manually
recorded video sequence normally starts on the
SD card 10 seconds before the triggering time.

Car Location

Another function in the ACE 2.0 app enables
you to find your parked car more easily. If the
ACE 2 is connected to the ACE 2.0 app when
you switch to parking mode, a low resolution
image will be saved from both the front and
rear cameras in the ACE 2.0 app. At the same
time, the position of the car will be shown on a
digital map (depending on the legal setting in
the country concerned). A GPS signal for the
ACE 2 is required for this function when it is
switched to parking mode. This function will help
you remember the parking space number in a car
park, for example, or find the location of your car
in an unfamiliar city using the map. Alternatively,
you can execute this function manually using the
update button.
The photos and position indicator (only
if the GPS function is active) are saved
in the ACE 2.0 app until the function is
executed again.
The Wi-Fi connection to the ACE 2 must
be connected to enable the position
indicator to be displayed on android
smartphones.
35

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Advanced car eye 2.0

Inhaltsverzeichnis