Install Firmware Update; Switching On And Off Manually; Settings - BMW Advanced Car Eye 2 Bedienungsanleitung

Install firmware update

As soon as a firmware update is available, the
ACE 2.0 app will request that you install it.
Please follow the instructions in the ACE
2.0 app before an update for the ACE 2 is
carried out.
A firmware update may result in the micro
SD card being formatted automatically.
In other words, all existing data may be
deleted. If necessary, back up the media
data on your micro SD card beforehand.
Your personal settings will remaining
place after a firmware update.

Switching on and off manually

Switch on the device by pressing the Power
•
button briefly when the ignition is on and
during the exit phase.
It can be switched off by pressing the Power
•
button for at least 3 seconds.

Settings

You can alter the default settings using the ACE
2.0 app to adjust the camera properties to suit
your personal requirements, your driving style
and the ambient conditions.
Individual basic settings:
Recording types
•
Thresholds of the sensors
•
Duration of the entry and exit phase
•
Selection of manual recording
•
Camera selection/image frequency
•
Speaker volume
•
Wi-Fi settings
•
There are also extended and information
settings:
Switching the automatic car location query
•
on and off
Information display in videos:
•
–
Date
–
Time
–
GPS coordinates (depending on the legal
setting in the country concerned)
–
Speed
–
Speed units
Switching the security LEDs on and off
•
(depending on the legal setting in the
country concerned)
Switching the microphone on and off
•
Switching the GPS function on and off
•
(depending on the legal setting in the
country concerned):
–
Calculating driving speed
–
Location
–
Coordinates in the media data
Displaying the ACE 2 log file
•
41