Metal Décor Strips; What To Do If - AEG 66300KF-an Montage- Und Gebrauchsanweisung

Metal décor strips
1
1. Wipe metal décor strips with a damp cloth and a little washing up liq-
2. Soak dried on spillages with a wet cloth. Afterwards wipe off and rub

What to do if ...

Downloaded from www.Manualslib.com
Warning! Do not use vinegar, lemon juice or lime slaking agents on the
cooking surface's décor strips, otherwise dull spots will result.
When cleaning do not introduce flat objects (e.g. knives) under the dé-
cor strips, as otherwise these can possibly become detached.
uid.
dry.
Problem
The cooking zones will not
switch on or are not func-
tioning
The residual heat indicator
is not displaying anything
manuals search engine
Possible cause
More than 10 seconds have
passed since the appliance
was switched on
The child safety device is
l
switched on
Several sensor fields were
touched at the same time
The sensor fields are partly
covered by a damp cloth or
with liquid
Safety cut-out has been
triggered
l
The lock is switched on
The cooking zone was only
on for a short time and is
therefore not hot
Remedy
Switch the appliance on
again.
Deactivate the child safety
device (See the section
"Child safety device")
Only touch one sensor field
Remove the cloth or the
liquid.
Switch the appliance on
again.
Switch the appliance on
again
Switch off the lock (See
the section "Locking/un-
locking the control panel")
If the cooking zone is sup-
posed to be hot, call the
Customer Service Depart-
ment.
45