Basic Functions; Playing A Disc - Samsung dvd p390 Bedienungsanleitung

basic functions

Playing a Disc

Before Play
- Turn on your TV and set it to the correct Video
Input by pressing TV/VIDEO button on the TV
remote control.
- If you connected an external Audio System, turn
on your Audio System and set it to the correct
Audio Input.
After plugging in the player, the first time you
press the DVD POWER button, this screen comes
up: If you want to select a language, press a
button then press ENTER (This screen will only
appear when you plug in the player for the first
time.)
If the language for the startup screen is not set,
the settings may change whenever you turn the
power on or off. Therefore, make sure that you
select the language you want to use.
Once you select a menu language, you can
change it by pressing the
panel of the unit for more than 5 seconds with
no disc in the unit. Then the SELECT MENU
LANGUAGE window appears again where you
can reset your preferred language.
Playback
1. Press the OPEN/CLOSE ( ) button, the tray opens.
2. Place a disc gently into the tray with the disc's label facing
up.
3. Press the PLAY/PAUSE (
) button to close the disc tray. When you stop disc play,
the player remembers where you stopped, so when you
press PLAY/PAUSE ( ) button again, it will pick up
where you left off.
π/†
button on the front
English
Français
Deutsch
Español
Italiano
Nederlands
) button or OPEN/CLOSE (
4. Stopping Play
Press the STOP ( ) button during play.
5. Removing Disc
Press the OPEN/CLOSE ( ) button.
6. Pausing Play
Press the PLAY/PAUSE (
during play.
- Screen stops, no sound.To resume, press the PLAY/
PAUSE ( ) button once again.
7. Step Motion Play (Except CD)
Press the SKIP ( ) button on the remote control during
PAUSE mode.
- Each time the button is pressed, a new frame will
appear.
- No sound is heard during STEP mode.
- Press the PLAY/PAUSE (
normal play.
- You can only perform step motion play in the
forward direction.
8. Slow Motion Play
Press the SEARCH (
/
speed between 1/2, 1/4 and 1/8 of normal during PAUSE
mode.
- No sound is heard during slow mode.
- Press the PLAY/PAUSE (
normal play.
Note
- If the player is left in the stop mode for more
than one minute without any user interaction, a
screen saver will be activated. Press the PLAY/
PAUSE ( ) button to resume normal play.
- If the player is left in the stop mode for more than
about 30 minutes, the power will automatically
shut off. (Automatic Power-Off Function)
- If the player is left for about 5 minutes in pause
mode, it will stop.
- This ( ) icon indicates an invalid button press.
) button on the remote control
) button to resume
) button to choose the play
) button to resume
English _1