Samsung dvd p390 Bedienungsanleitung Seite 12

connections
Connecting to a TV (SCART)
1
Using Scart cable, connect to SCART terminal on the rear
of the DVD player to the SCART IN terminals of TV.
2
Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until
the Video signal from the DVD player appears on the TV
screen.
Note
- Noise may be generated if the audio cable is too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page.
(See pages 13 to 14)
- The number and position of terminals can vary depending on your TV set.
Please refer to the user's manual of the TV.
- Please do not connect Scart and Component Video (Y, Pb, Pr) output simultaneously, as they may
interfere and degrade both video output quality.
1_ connections
Please do not use Scart and Component
Video (Y, Pb, Pr) output simultaneously.
SCART Cable