Inhaltsverzeichnis
Werbung
2.4 Expansion Slots (PCI and PCI Express Slots)
There is 1 PCI slot and 3 PCI Express slots on this motherboard.
PCI Slot: The PCI slot is used to install expansion cards that have 32-bit
PCIE Slots:
Installing an expansion card
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
Step 6.
20
Downloaded from
www.Manualslib.com
PCI interface.
PCIE1 (PCIE x16 slot) is used for PCI Express x16 lane width
graphics cards, or used to install PCI Express graphics cards to
support CrossFireX
PCIE2 (PCIE x1 slot) is used for PCI Express cards with x1 lane
width. Such as Gigabit LAN card or SATA2 cards, etc.
PCIE3 (PCIE x16 slot) is used for PCI Express x4 lane width
cards, or used to install PCI Express graphics cards to support
TM
CrossFireX
function.
1. In single VGA card mode, it is recommended to install a
PCI Express x16 graphics card on PCIE1 slot.
2. In CrossFireX
graphics cards on PCIE1 and PCIE3 slots.
Before installing the expansion card, please make sure that the
power supply is switched off and the power cord is unplugged.
Please read the documentation of the expansion card and make
necessary hardware settings for the card before you start the
installation.
Remove the system unit cover (if your motherboard is already
installed in a chassis).
Remove the bracket facing the slot that you intend to use. Keep
the screws for later use.
Align the card connector with the slot and press firmly until the
card is completely seated on the slot.
Fasten the card to the chassis with screws.
Replace the system cover.
ASRock FM2A85X Extreme4-M Motherboard
manuals search engine
TM
function.
TM
mode, please install PCI Express x16
Werbung
Inhaltsverzeichnis
