Installing An Expansion Card - ASROCK 775XFire-RAID Bedienungsanleitung

All manuals and user guides at all-guides.com
2.4 Expansion Slots (PCI, PCI Express, and AGI Express 2.4 Expansion Slots (PCI, PCI Express, and AGI Express 2.4 Expansion Slots (PCI, PCI Express, and AGI Express 2.4 Expansion Slots (PCI, PCI Express, and AGI Express 2.4 Expansion Slots (PCI, PCI Express, and AGI Express
Slots) Slots) Slots)
Slots) Slots)
There are 3 PCI slots, 2 PCI Express slots, and 1 AGI Express slot (PCI Express x 4)
on this motherboard.
PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI
interface.
PCIE Slots: PCIE1 (PCIE x 16 slot) is used for PCI Express cards with x16 lane
width graphics cards.
PCIE2 (PCIE x 1 slot) is used for PCI Express cards, such as
Gigabit LAN card, SATA2 card, etc. Please check the jumper set
tings on page 15 for different functions.
AGI Express slot (PCI Express x 4):
AGI Express slot (PCI Express x 4) is used to install PCI Express expan-
sion cards. For the information of the compatible PCI Express VGA cards,
please refer to the "Supported PCI Express VGA Card List for AGI Ex-
press Slot (PCI Express x 4)" on page 8. Please check the jumper set-
tings on page 15 for different functions.

Installing an expansion card

Installing an expansion card Installing an expansion card Installing an expansion card Installing an expansion card
Step 1. Before installing the expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2. Remove the bracket facing the slot that you intend to use. Keep the screws
for later use.
Step 3. Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
Step 4. Fasten the card to the chassis with screws.
2.5 Dual Graphics Feature 2.5 Dual Graphics Feature 2.5 Dual Graphics Feature
2.5 Dual Graphics Feature 2.5 Dual Graphics Feature
This motherboard supports Dual Graphics Technology. When installing the add-on
VGA cards to this motherboard, you are allowed to choose two different ways to
decide the function of PCIE2 slot (PCIE x 1) and AGI Express slot. The default value
of this feature is to enable PCIE2 slot (PCIE x 1) and AGI Express slot (only PCI
Express x 1). You can also adjust the jumpers to disable PCIE2 slot (PCIE x 1). Then
only AGI Express slot (PCI Express x 4) will be enabled. In other words, you are able
to adjust the jumpers to enjoy the benefit of Dual Graphics feature. Please refer to the
table below for the correct jumper settings.
1 4 1 4 1 4
1 4 1 4
ASRock 775XFire-RAID Motherboard