Inhaltsverzeichnis
Werbung
2.4 Expansion Slots (PCI and PCI Express Slots)
There are 2 PCI slots and 2 PCI Express slots on this motherboard.
PCI Slots: PCI slots are used to install expansion cards that have the 32-bit PCI
PCIE Slots:
Installing an expansion card
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
Step 6.
16
Downloaded from
www.Manualslib.com
interface.
PCIE1 (PCIE x16 slot; Blue) is used for PCI Express x16 lane width
graphics cards, or used to install PCI Express graphics cards to support
TM
CrossFireX
function.
PCIE2 (PCIE x16 slot; Blue) is used for PCI Express x4 lane width
cards, or used to install PCI Express graphics cards to support
TM
CrossFireX
function.
1.
In single VGA card mode, it is recommended to install a PCI Ex-
press x16 graphics card on PCIE1 slot.
2.
In CrossFireX
cards on PCIE1 and PCIE2 slots.
Before installing the expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Remove the system unit cover (if your motherboard is already installed
in a chassis).
Remove the bracket facing the slot that you intend to use. Keep the
screws for later use.
Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
Fasten the card to the chassis with screws.
Replace the system cover.
ASRock A75 Pro4-M Motherboard
manuals search engine
TM
mode, please install PCI Express x16 graphics
Werbung
Inhaltsverzeichnis
