Installing Windows - ASROCK A75 Pro4-M Handbuch

2.11 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.

2.12 Installing Windows

If you want to install Windows
bit on your SATA3 HDDs with RAID functions, please refer to the document at the
following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.13 Installing Windows
If you want to install Windows
OS on your SATA3 HDDs without RAID functions, please follow below procedures
according to the OS you install.
2.13.1 Installing Windows
If you want to install Windows
functions, please follow below steps.
Using SATA3 HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up UEFI.
A.
B.
STEP 2: Install Windows
Downloaded from www.Manualslib.com
®
XP 64-bit With RAID Functions
®
®
XP 64-bit Without RAID Functions
®
®
Enter UEFI SETUP UTILITY
Configuration.
Set the "SATA Mode" option to [IDE].
®
XP / XP 64-bit OS on your system.
ASRock A75 Pro4-M Motherboard
manuals search engine
TM
7 / 7 64-bit / Vista
TM
7 / 7 64-bit / Vista / Vista
TM
7 / 7 64-bit / Vista
TM
7 / 7 64-bit / Vista / Vista
®
XP / XP 64-bit Without RAID Functions
XP / XP 64-bit on your SATA3 HDDs without RAID
Advanced screen
TM
/ Vista 64-bit / XP /
TM
64-bit / XP / XP 64-
TM
/ Vista 64-bit / XP /
TM
64-bit / XP / XP 64-bit
Storage
33