Weidmuller PTX800A Bedienungsanleitung Seite 36

SetupSequence(continued)
Alarmchanneltwosettings
As above
As channel one (except uses A2_nor_E, A2=_rate,..., delay_2=)
Generalalarmsettings
Setpoint
SECure_y
security
SECure_n
Alarm reset
reS_Auto
sequence
rES_Oper
Analogueoutputsettings(notshownunlessoutputsarefitted)
Out=_Cur
Output type
Out=volt
Out=_Cur
Output type
Out=volt
Out_LO=
Output range
Out_HI=
Out_dir
Output Action
Out_rev
Calibrationoptions
Calibrate
CalOut_n
Output?
CalOut_y
Display
Intens_=
Intensity
234567. 8 9
Save values
6
Setpoints fixed at setup
Can change setpoints
Automatic reset
Manual reset
Current (mA) output
Voltage (V) output
Current (mA) output
Voltage (V) output
Introduces output low value
Value, e.g., 4.00 mA
4. 0 0
Introduces output high value
Value, e.g., 20.00 mA
20. 0 0
Direct (proportional) output
Reversed (inverted) output
Skip output calibration
Calibrate outputs
Introduces the display intensity
Demo display for adjustment
Instrument is saving the changes to the setup and returning to
SAVE
normal operation
Toggle Accept
Toggle Accept
Toggle Accept
Toggle Accept
- - Next
Dec Inc Accept
- - Next
Dec Inc Accept
Toggle Accept
Toggle Accept
- - Next
Dec Inc Accept