Setup Sequence - Weidmuller PTX800A Bedienungsanleitung

Analogueoutputtypeandrange
The output type (current/voltage) is like the input type as it is set by
manufacturing. The output range parameters let the PTX800A show
the output range correctly during review mode and prompt for the
correct values during calibration. They have no affect on the operation
of the instrument. If you change them you must be prepared to
calibrate the outputs.
OutputAction
Direct action results in the normal, proportional output. Reverse action
gives an output that is inverted with respect to the rate, so a rate of
zero gives a full scale output and vice versa.
DisplayIntensity
There are fourteen different levels.
•SetupSequence
Setting Display
S/W Version
vEr_1. 0 1
Inputs
InP=Cur
Input type
InP=voLt
Input range
low value
Input range
InpHI=
High value
Input Calibra-
tion?
Damping
dFaCtor=
Factor
Transfer
Function
SQrroot
4
Description
S/W Version 1.01
Current (mA) based signal
Voltage based (V) based signal
Introduces Input low value
InpLO=
Value, e.g., 4.00 mA
4. 0 0
Introduces Input high value
Value, e.g., 20.00 mA
20. 0 0
Calibrate the inputs
CALInY
Skip Input calibration
CALInn
Introduces Input damping factor
Damping Factor , e.g., 2
2
Linear
LinEAr
Square root
PGM
Å ì
- - Next
Toggle Accept
- - Next
Dec Inc Accept
- - Next
Dec Inc Accept
Toggle Accept
- - Next
Dec Inc Accept
Toggle Accept