Herunterladen Inhalt Inhalt Diese Seite drucken

Makita DUB143 Gebrauchsanleitung Seite 11

Vorschau ausblenden Andere Handbücher für DUB143:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20
19. Never block suction inlet and/or blower outlet.
• Do not block suction inlet or blower outlet to
clean up in dusty areas.
• Do not use the blower with a tapered nozzle
smaller than the original one, such as a new
nozzle obtained by attaching an extra diameter-
reduced hose or smaller hose to the nozzle top
end.
• Do not Use the blower to inflate balls, rubber boat
or the similar.
Increased motor revolution may cause dangerous
fan breakage and result in serious personal injury.
Heated motor and control circuit may cause a fire.
20. Do not operate the blower near open window, etc.
21. Operating the blower only at reasonable hours is
recommended – not early in the morning or late at
night when people might be disturbed.
22. To reduce damage from vibration and/or damage
to the ears, operate the machine at low speed if
possible and limit the time of operation.
23. Using rakes and brooms to loosen debris before
blowing is recommended.
24. It is recommended to slightly dampen surfaces in
dusty conditions or use mister attachment available
on the market.
25. It is recommended to use the long nozzle so the air
stream can work close to the ground.
26. Young children should be supervised to ensure that
they do not play with the blower.
27. Do not insert fingers or other objects into suction inlet
or blower outlet.
28. Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying machines with your finger on the switch or
energising machines that have the switch on invites
accidents.
29. Make sure that there are nobody around you when
you work at high places.
Maintenance and storage
30. Keep all nuts, bolts and screws tight to be sure the
machine is in safe working condition.
31. Replace worn or damaged parts.
32. Use only genuine replacement parts and
accessories.
33. Store the machine only in a dry place.
Battery tool use and care
34. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
35. Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
36. When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
37. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure
to follow the safety rules stated in this instruction
manual may cause serious personal injury.
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before
using
battery
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product using
battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may result
in a risk of overheating, possible burns and even
an explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any
conductive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current
flow, overheating, possible burns and even a
breakdown.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50 °C (122 °F).
7. Do not incinerate the battery cartridge even if it is
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
10. The contained lithium-ion batteries are subject to
the Dangerous Goods Legislation requirements.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on packaging
and labeling must be observed.
For preparation of the item being shipped, consulting
an expert for hazardous material is required. Please
also observe possibly more detailed national
regulations.
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move around
in the packaging.
11. Follow your local regulations relating to disposal
of battery.
SAVE THESE INSTRUCTIONS.
ENC007-11
cartridge,
read
all
11

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Dub183Dub183z10006200

Inhaltsverzeichnis