Cpu Installation - ASROCK H61 Pro BTC Handbuch

2.3 CPU Installation

For the installation of Intel 1155-Pin CPU,
please follow the steps below.
Step 1.
Step 2.
14
Downloaded from www.Manualslib.com
Before you insert the 1155-Pin CPU into the socket, please check if the
CPU surface is unclean or if there is any bent pin on the socket. Do not
force to insert the CPU into the socket if above situation is found. Other-
wise, the CPU will be seriously damaged.
Open the socket:
Step 1-1. Disengaging the lever by depressing
down and out on the hook to clear
retention tab.
Step 1-2. Rotate the load lever to fully open po-
sition at approximately 135 degrees.
Step 1-3. Rotate the load plate to fully open po-
sition at approximately 100 degrees.
Remove PnP Cap:
Step 2-1. Attach your index finger to the upper
edge of the PnP Cap.
Step 2-2. Use your thumb to remove PnP Cap
(Pick and Place Cap) from the CPU
socket by lifting the cap tab.
1. It is recommended to use the cap tab to handle and avoid kicking
off the PnP cap.
2. This cap must be placed if returning the motherboard for after
service.
ASRock H61 Pro BTC Motherboard
manuals search engine
Load Plate
Load Lever
Socket Body
Contact Array
1155-Pin Socket Overview
B
A