Herunterladen Inhalt Inhalt Diese Seite drucken

Connecting The Power Cord (2) - Pioneer AVIC-HD3 Handbuch

Vorschau ausblenden Andere Handbücher für AVIC-HD3:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 62
Connecting the System

Connecting the power cord (2)

Speed detection circuit lead
Vehicle injection
computer
Connection method
Pass the extension cord
and the lead for the
speed detection circuit
through this hole.
Light green
Used to detect the ON/OFF status of the handbrake. This lead must be
connected to the power supply side of the handbrake switch.
If this connection is made incorrectly or omitted, certain
functions of your navigation system will be unusable.
LIGHT GREEN LEAD AT POWER
CONNECTOR IS DESIGNED TO DETECT
PARKED STATUS AND MUST BE
CONNECTED TO THE POWER SUPPLY SIDE
OF THE HANDBRAKE SWITCH. IMPROPER
CONNECTION OR USE OF THIS LEAD MAY
VIOLATE APPLICABLE LAW AND MAY
RESULT IN SERIOUS INJURY OR DAMAGE.
11
Downloaded from
www.Manualslib.com
Connector
Pink (CAR SPEED SIGNAL INPUT)
The mobile navigation system is connected here to detect the distance
the vehicle travels. Always connect the vehicle's speed detection
circuit or the ND-PG1 speed pulse generator, sold separately. Failure
to make this connection will increase errors in the location display.
IMPROPER CONNECTION MAY RESULT IN SERIOUS
DAMAGE OR INJURY INCLUDING ELECTRICAL SHOCK,
AND INTERFERENCE WITH THE OPERATION OF THE
VEHICLE'S ANTILOCK BRAKING SYSTEM, AUTOMATIC
GEARBOX AND SPEEDOMETER INDICATION.
• It is strongly suggested that the speed pulse wire be connected
for accuracy of navigation and better performance of interlock.
Clamp firmly
• If the speed pulse wire is unavailable for some reason, it is
with needle-
recommended that the pulse generator (ND-PG1) be used.
nosed pliers.
Note:
The position of the speed detection circuit and the position of the
Close the cover.
parking brake switch vary depending on the vehicle model. For
details, consult your authorised Pioneer dealer or an installation
professional.
Connection method
Clamp the parking brake
switch power supply side lead.
Clamp firmly with
needle-nosed pliers.
manuals search engine
Power supply side
Earth side
Handbrake switch

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis