Samsung HW-K470 Bedienungsanleitung Seite 14

Controlling the Soundbar using Your TV Remote Control
1. Press and hold the
2. "ON - TV REMOTE" appears on the Soundbar's display.
3. In the TV's menu, set the TV speaker to external speaker..
c TV menus differ by manufacturer and model. Refer to the TV's user manual for further information.
c Only the VOLUME +/- and MUTE buttons will be available to control the Soundbar.
c This function is not available when the Soundbar is in the TV SoundConnect, TV ARC, or HDMI mode.
c Manufacturers supporting this function:
• VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA
• This function may not be compatible with your TV's remote depending on the remote control's
manufacturer.
c To turn off this function, press the
"OFF - TV REMOTE" appears on the Soundbar's
Installing the Battery in the Remote Control
1. Use a suitable coin to turn
the remote control's battery
cover counterclockwise to
remove it as shown in the
figure above.
SOUND button for more than 5 seconds while the Soundbar is turned on.
SOUND button for 5 seconds.
2. Insert a 3V lithium battery. Keep the
positive (+) pole facing up when
inserting the battery. Put the battery
cover on, and then align the '●'
marks side by side as shown in the
figure above.
· 13 · English
Bluetooth Press to turn the Bluetooth POWER On function
on and off. When the Bluetooth POWER On
POWER
function is on, ON - BLUETOOTH POWER
appears in the Soundbar's display.
SOUND You can select from TREBLE, BASS, SUB
CONTROL WOOFER LEVEL, AUDIO SYNC,REAR
SPEAKER,and REAR LEVEL.
• Press to select TREBLE, BASS,
SUBWOOFER LEVEL, or AUDIO SYNC. Then,
use the ,  buttons to adjust the Treble or
Bass volume from -6 ~ +6, SUB WOOFER
LEVEL volume from -12, -6 ~ +6.
• If the video and audio between the TV and your
Soundbar are not synchronized, select the
AUDIO SYNC in Sound Control, and then set
audio delay between 0~300 milliseconds by
using the ,  buttons.
• To control the volume of the rear speaker sound,
select REAR SPEAKER in Sound Control, and
then use the ,  buttons to toggle the rear
volume between OFF-RS and ON-RS.
• To control the volume of the rear level sound,
select REAR LEVEL in Sound Control, and then
adjust the volume between RS -6~+6 using the
,  buttons.
display.
3. Use a suitable coin to turn
the remote control battery
cover clockwise as far as it
will go to fix it in place.