Herunterladen Diese Seite drucken

Bellelli GIO PLUS Bedienungsanleitung Seite 11

Groups 1/2/3

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
Important
Congratulations and thank you for buying your
new child seat.
This child seat is designed to provide maximum
comfort and safety for your child. To guarantee
the best possible protection, it must be used
correctly. Research shows that many child seats
are not fitted and used correctly. This reduces
their effectiveness in the event of an accident.
Read the instructions carefully before using
the child seat, follow them to the letter and
keep them for future reference. A convenient
place to store the instruction manual is provided
on the back of the child seat.
Use of the child seat enormously reduces the
risk of injury in the event of an accident. The
majority of accidents occur in urban areas:
always use the child seat, even for short
journeys. Never travel with a child in your arms:
in the event of an accident, it could be
impossible to hold onto them.
Further information on the use of the child seat
is available at www.bellelli.com.
Contact the retailer if you have any questions or
comments.
Warning
1 - This is a "Universal" child restraint. It is
approved in accordance with Regulation No.
44, amendments series 04. It is suitable for
general use in vehicles and is compatible
with most, but not all, car seats.
2 - Perfect compatibility is more likely if the
vehicle manufacturer has declared in the
handbook that it is suitable for the installation
of "Universal" child restraints for the age
group in question.
3 - This child restraint has been classified as
"Universal" under more stringent conditions
than those applied to earlier models that do
not carry this notice.
4 - This child restraint is only suitable for use in
vehicles fitted with 3-point static or inertia
reel safety belts approved in accordance with
UN/ECE Regulation No. 16 or other
equivalent standards.
5 - If in doubt, consult either the child restraint
manufacturer or the retailer.
Important information
Safety
Carefully follow the instructions for use.
Do not tamper with or modify the child seat in
any way.
Warning: incorrect fitting or use of the child
seat may seriously jeopardize the safety of
the child.
Position the child seat so that it cannot be
damaged by closing the car doors, adjusting the
seats or similar actions.
Do not leave the child unattended in the child
seat.
Do not leave the child seat in the car in the sun:
the plastic parts may become very hot.
Make sure that luggage and other items are
secured in the car. The driver and all
passengers must wear safety belts.
Attach the child seat to the car seat with the car
safety belts even when there is not a child in it.
Periodically check the condition of the child
seat. Replace the seat if it shows signs of
damage or wear and tear.
Do not use the child seat if any parts are broken
or missing.
Only use original spare parts.
In the event of an accident
All passengers must be told how to take the
child out of the seat.
The child seat must be replaced after an
accident: it may have suffered damage that is
not visible on the outside.
Comfort
When the child seat is used on the rear seats of
the car, make sure that there is enough room for
the child's feet. If necessary, move the front seat
forward slightly.
Take frequent breaks on long journeys so that
the child can move about freely.
Assembling the child seat
Identify the components of the child seat before
using it. Carefully study figure 1.
Place the seat on a flat surface. Push the
backrest downwards into the guides in the lower
part of the seat. Check that it is fully attached.
The metal yoke must remain behind the
backrest (fig 2).
9
EN

Werbung

loading