Necessary Tools - Kirami CUBE Gebrauchsanweisungen

USER MANUAL
Kirami® CUBE Outside hot tub heater
Contents
CUBE heater: marine aluminium (AlMg3)
•
Fire grate base 1pc
•
Cast iron grate 1pc
•
Furnace door with steel plate inside
•
Ø75mm rubber hoses for connecting the heater 2 pcs
•
Hose clamps Ø80-85mm 4 pcs
•
Ash shovel
•
This user manual
•
Depending on the model of the heater (two or three connection pipes) are connection hoses and
possible connection plates delivered accordingly. Three pipe heaters area only delivered as
replacement for old heaters in old aluminium tubs. This manual does not include instructions for those
models. Also special models like left side version are not covered in this manual.

Necessary tools

You will need a 13mm wrench or similar for fixing the heater to the barrel. And for installation on an
aluminium tub you also need a battery screwdriver where you can use the head supplied.
Read this manual carefully and store for future reference.
Kirami Oy
Villiläntie 2 tel. +358 10 574 2170
FI-32730 Sastamala
Inspect the contents of the delivery immediately!
NOTICE! Minimum water level before fire, page 5!
15/52
info@kirami.fi
www.kirami.fi
18.05.2020