Environmental Aspects; Disposal Of Packaging And Appliance - Pelgrim GKB 7-Serie Anleitung

faults
86
Table
Fault Cause
The burner does not burn - Burner parts incorrectly
evenly. installed.
- Burner parts dirty or damp.
- Wrong type of gas used
(where bottled gas is used).
The burner goes out after - Control knob not kept
igniting. pressed in long enough
(appliance fitted with
thermocouple).
In case of faults phone the service department. See the guarantee certificate or
consult the internet site www.hps.nl.
This appliance should only be connected up by a registered installer!
87
Solution
- Assemble the burner parts
using the centring ridges and
ensure that they fit properly
together.
- Clean and dry the burner
parts, checking that the
outflow holes are open.
- Check that the gas used is
suitable for the appliance.
- Keep the control knob
pressed in for at least
5 seconds.

environmental aspects

Disposal of packaging and appliance

In the manufacturing of this appliance use has been made of durable materials.
The appliance packaging is recyclable. The following may have been used:
■ cardboard;
paper;
■
■ polythene film (PE);
■ CFC-free polystyrene (PS hard foam);
polypropylene tape (PP).
■
Dispose of these materials in a responsible manner and in accordance with
government regulations.
On the data plate is put the symbol of a crossed-out
wheeled dustbin:
This means that at the end of its working life, the product must not be disposed
of as urban waste. It must be taken to a special local authority differentiated
waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative
consequences for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources.
As a reminder of the need to dispose of household appliances separately, the
product is marked with a crossed-out wheeled dustbin.