Building In - Pelgrim GKB 7-Serie Anleitung

installation instructions
90

Building in

Preparing the hob
Only for France:
Remove the protective foil of the sealing strip (A)
and attach the sealing strip in the groove of the
aluminium profiles or the edge of the glass
plate. Do not attach the sealing strip through the
corner. Instead, cut 4 pieces that fit tightly
together in the corners.
91
1/2" ISO 228
(straight)
1/2" ISO 7/1
(conical)
sealing ring
1/2" ISO 228
(straight)
1/2" ISO 228
(straight)
sealing ring
A
installation instructions
Building in
Cut opening in worktop
Saw the opening in the worktop. This should be done very accurately (building in
dimensions).
If the woodtop is made of treated wood, then coat the sawn surfaces of the top
with sealing varnish, to prevent moisture causing the top to swell.
Attachment points for mounting brackets
threaded hole /
screw / worktop
thin worktops
Building in dimensions GKB633 / GKB634 / GKB635 / GKB636 / GKB635W /
thick worktops