Mapal KS-SPANNPATRONE Montage- Und Betriebsanleitung Seite 33

Cleaning the HSK in-
terface
Cleaning the tool
shank
Sharp cutting edges on the tool!
Sharp cutting edges may cause cutting injuries.
➔ Wear protective gloves during tool changes.
Montage- und Betriebsanleitung
Installation and Operating Instructions
8. Clean the HSK interface of the
9. Clean the tool shank with a clean
CAUTION
machine spindle with a taper
wiper (order number, see Tab. 3:
Taper wiper).
cloth.
EN
33