Operating The Ks Clamping Cartridge; Mounting Into The Machine Spindle, Chuck Or Adapter - Mapal KS-SPANNPATRONE Montage- Und Betriebsanleitung

Operating the KS clamping cartridge

5.1 Mounting into the machine spindle, chuck or adapter

EN
30
INFORMATION
For the KS clamping cartridge in standard and high-pressure
design, use solely the KS assembly pliers for standard and
high-pressure design with the flute.
For the KS clamping cartridge in MQL design use solely the
KS assembly pliers with two pins. See section 4.2 Illustra-
tion of the KS assembly plier.
Open the KS assembly
pliers
INFORMATION
Make sure the KS assembly pliers gripper jaws are open and
that the flute of the KS clamping cartridge fits into the
sheath in the standard and high pressure designs. Make sure
the KS assembly pliers jaws are open and that the pins of
the KS assembly pliers fit into the opening of the KS clamp-
ing cartridge in the MQL design.
1. Open the KS assembly pliers
gripper jaws by pushing down
the ball head.
2. Keep the ball head pressed down.
Montage- und Betriebsanleitung
Installation and Operating Instructions