EN
Grater
1. Place the work bowl on the body of the appliance and secure it by turning it
counter-clockwise (the arrows shown on the work bowl and the appliance body are
opposite each other when seated correctly).
2. Place the spindle extension on the coupling inside the work bowl.
3. Insert the required blade into the blade holder.
4. Place the blade holder on the spindle extension inside the work bowl.
5. Place the lid on the work bowl and secure it by turning it counter-clockwise (the
arrows shown on the lid and the handle of the work bowl are opposite each other
when seated correctly).
6. Insert the plug into the wall outlet.
7. Use the speed control to switch on the appliance at speed 1 or 2 (depending on the
type of food being prepared).
8. Place the food in the feed tube exclusively using the pusher.
9. After grating is completed, turn the speed control to the "0/OFF" position and
remove the plug from the wall outlet.
10. The bowl can now be removed.
Dicing blade set
1. Assemble the blade set (see figure).
2. Place the spindle extension on the coupling inside the work bowl.
3. Place the dicing blade set on the spindle extension inside the work bowl.
4. Part of the blade set with the grid must be placed at the level of the bowl handle.
5. Place the lid on the work bowl and secure it by turning it counter-clockwise (the
arrows shown on the lid and the handle of the work bowl are opposite each other
when seated correctly).
6. Place the work bowl on the body of the appliance and secure it by turning it
counter-clockwise (the arrows shown on the work bowl and the appliance body are
opposite each other when seated correctly).
7. Insert the plug into the wall outlet.
8. Use the speed control to switch on the appliance at speed 1 or 2 (depending on the
food being prepared).
9. Place the food in the feed tube exclusively using the pusher.
10. After dicing is completed, turn the speed control to the "0/OFF" position and
remove the plug from the wall outlet.
11. The bowl can now be removed.
58
RM3000