INSIDO 89980104 Bedienungsanleitung Seite 15

Hepa air outlet filter
Please note:
The Hepa filter in the cleaner will became dusty over time. This is normal and will not affect the performance of
the filter. If the Hepa filter is so dusty that suction does not return to 100%, we suggest that the filter be removed
then rinsed under the faucet and allowed to dry for 24 hours by airing not near the fire or some high temperature
objects before refitting into the vacuum. This should be done at least every six months or when suction appears
to be reduced obviously.
Note:
The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will overheat and
could become damaged.
Important:
All filters should be checked regularly for signs of damage, preferably after each cleaning task. The filters must
be replaced immediately if they become damaged. Always disconnect the vacuum from the electrical outlet
when checking the filters.
Parking:
This vacuum cleaner can be parked as below style to save your room space.
TECHNICAL DATA
Voltage: 220-240V ~ 50-60Hz
Power: 800W
- 14 -