Installation Of Vmi; Installation Instructions - Sika induQ VMI Serie Betriebsanleitung

Installation of VMI

4 Installation of VMI
Before installing, check that
 the wetted materials of the device are suitable for the liquid being used
( § 9.2 "Materials table").
 the equipment is switched off and is in a safe and de-energised state.
 the equipment is depressurised and has cooled down.

4.1 Installation instructions

RISK OF MALFUNCTION DUE TO EXTERNAL
MAGNETIC FIELDS
Magnetic fields close to the device can cause malfunctions and
should be avoided.
 Ensure that no external magnetic fields are present at the
installation site of the VMI.
The VMI can always be installed anywhere along the pipeline. Straight sections of piping
•
are preferable, however.
- 28 -
— Series VMI
© SIKA • Ba_VMI • 10/2020