Programme; Programming With A Pc Or Laptop; Programming With A Windows Notebook/Tablet - SimonsVoss SmartCD2.G2 Kurzanleitung

7. Programme

7 Programme
During programming, there should a minimum gap of around 10 cm
between SmartCD and the locking device; for SmartRelay it should be
around 30 cm and 70 cm for the block lock.

7.1 Programming with a PC or laptop

ü
ü
1. Click the button Programming in the LSM software.
2. Follow the further instructions.
The current version of the LSM software must be installed on the PC/
laptop.
NOTE
Requirements for new installation or update of the LSM software
The new installation or update of the LSM software can only take place
under certain conditions.
1. Connect a programming device to the PC/laptop.
2. Perform the installation or update with administrator rights.

7.2 Programming with a Windows notebook/tablet

ü
26 / 112
Current version of the LSM software installed.
Programming device connected.
The window "Programming" opens.
9
Current LSM-Mobile version installed on your notebook.
SmartCD2.G2
EN