Product-Specific Safety Instructions - SimonsVoss SmartCD2.G2 Kurzanleitung

SmartCD2.G2

3 Product-specific safety instructions

WARNING
Dangers from built-in lithium batteries
The programming device contains lithium batteries. Lithium batteries
are dangerous if not handled properly.
1. Do not open the programming device. SimonsVoss can replace used
2. Do not expose the programming device to temperatures above 70
3. Do not burn the programming device.
NOTE
Initial charging of the built-in batteries.
The built-in rechargeable batteries are discharged when delivered.

Damage due to unsuitable cables
Defective USB cables may cause malfunctions.
Use only the supplied USB cable.

EN
batteries (subject to a charge).
°C.
Charge the programming device for at least three hours before using
it.
3. Product-specific safety instruc-
tions
23 / 112