Unpacking; Connecting - SimonsVoss SmartCD2.G2 Kurzanleitung

4. Unpacking

4 Unpacking
Scope of

delivery


You need the LSM software to operate the SmartCD2.G2.
For mobile programming on site, the LSM Mobile software or app must
also be installed on the mobile device.


Software and drivers can be found on the SimonsVoss homepage in the
service area during software downloads (
voss.com/en/service/software-downloads.html

5 Connecting

SmartCD2.G2 can be directly connected to a PC or laptop by plugging
the supplied cable into an unassigned USB port.
All digital locking devices and all active transponder media in
SimonsVoss System 3060 can be programmed using a SmartCD2.G2 in
conjunction with a PC/laptop.
24 / 112
SmartCD2.G2 programming device, (including permanently built-in
batteries)
Cable to connect to a USB port
Quick guide
The LSM Mobile software must be purchased separately.
The app is free of charge. You need the export tool included in the
LSM Mobile PC to use the app.
SmartCD2.G2
https://www.simons-
).
EN