Joie i-Venture R Bedienungsanleitung Seite 9

Ensure the enhanced child restraint
latched indicator on the base show
green so that i-Venture R seat is
securely installed onto the base; if it
shows red that means the i-Venture R
is incorrectly installed. -1
13
Securing your Child
1. Press the webbing adjustment
button, while pulling out the
shoulder harnesses to the proper
length.
14
-1 Adjustment webbing
14
2. Press the red button to disengage
the buckle.
15
15
13
1
14
1
15
3. Fix the buckles on the both sides of
the seat located on the both sides
of seat as shown to make placing
the child in rear facing mode more
convenient.
16
4. Please make sure the infant Insert
has the wedge assembled before
using it for infant.
17
Detach the snaps on
the head support to
remove the head
portion of the
infant Insert.
We recommend using the
full infant Insert while the
baby is under 60 cm or
until they outgrow it. The
infant Insert increases side
impact protection.
16
17
Remove the head support
portion of the infant Insert
when the child's head
no longer fits comfortably.
Remove the body
portion of the infant Insert
when the infant's shoulders
no longer fit comfortably.
1
Remove the infant Insert
cushion by detaching the
snaps to allow more
space when the infant
does not fit comfortably.
The cushion can be used
2
separately without being
attached to bolster the
infant's back for more
comfort.
16