Troubleshooting - Blumfeldt Flagranti Crystal View Bedienungsanleitung

EN
38

TROUBLESHOOTING

Problem
Pilot won't light.
Pilot won't stay lit.
Burner won't light.
Cause / Condition
Gas cylinder valve is
closed.
Blockage in orifice or
pilot tube
Air in the gas line.
Low gas pressure.
Igniter fails.
Dirt build up around
pilot.
Connection between
gas valve and pilot
assembly is loose.
Bad thermocouple
Gas pressure is low.
Blockage in orifice
Control knob is not
in "LOW" or "HIGH"
position.
Solution
Open valve.
Clean or replace orifice
or pilot tube.
Open gas line and bleed
it (pressing control
knob in) for not more
than 1-2 minutes or
until you smell gas.
Gas cylinder is low or
empty. Replace gas
cylinder.
Use match to light pilot,
and obtain new igniter
and replace.
Clean dirt from around
pilot.
Tighten connection and
perform leak test.
Replace thermocouple.
Replace gas cylinder.
Clear blockage
Turn control knob
to "LOW" or "HIGH"
position.