Flat-200 Twin HD-Ready
Ensure that the antenna be horizontally placed.
Change the elevation angle of the antenna according to your location (check azimuth, elevation
& skew table on page 14~19) then change the orientation of the antenna approximately near
the due south. (Elevation angle is engraved on the body bracket.)
Seeing the signal level shown on of your settop box, you can adjust the azimuth angle to the
maximum reception point. and then go back to the step 2 until the installation is optimized.
Finally, adjust skew angle. (Refer to next page about the skew angle.)
Example: the angle of Azimuth for PARIS is east of 158°. To learn more about your area please
refer to the table page 13.
azimuth
angle
0°
NORTH
Flat-200 Twin HD-Ready
B1
Orientation of the Antenna
Satellite ASTRA
elevation angle
Elevation, Azimuth & Skew
180°
SOUTH
A Z I M U T H
1) Elevation Angle Calibration
Calibrate the elevation angle to be aligned with the
satellite reception. Fasten it with a screw on B1.
12