2) Balcony Mount Assembly
Assemble the Joint Bracket B (B5) and the Joint Bracket A(B4) with 4 of M5s & the
accompanying M6s as in Figure(7). Use B7 to tighten securely.
Depending on the balcony structure, you may turn 90° of B4 & B5 and follow the instruction above.
As in Figure(8), insert the whole antenna set previously assembled as in Basic Type Assembly
above, and tighten it with 2 of M4s and the accompanying of M6s using B7.
Make sure that B2 attached to the antenna is horizontally placed and mount it with all the
remaining M6s.
Tighten firmly all the screws of the antenna once you find a final position for the best
signal quality.
M5
M6
B4
B5
Figure (7)
A1
Figure (8)
M6
M5
B4
B5
M4
8