Safety Instructions - Clarke-tech Flat-200 Twin HD-Ready Benutzerhandbuch

Flat-200 Twin HD-Ready
Contents .............................................. 2

Safety Instructions ................................. 2

Antenna Description .............................. 3
Contents of the Box ............................... 4
Where to Install Your Antenna ? .............. 6
Installation of the Antenna ...................... 6
1) Basic Assembly .............................. 6
2) Balcony Mount Assembly ................ 8
3) Wall Mount Assembly ...................... 9
Flat-200 Twin HD-Ready
Before using this product, please read this manual carefully and exactly
follow all installation, mounting and orientation instructions. All the
instructions should be observed in order to avoid any technical
malfunctions or any problems.
• Clarke-Tech is NOT responsible for an accident or problem related to the antenna
installation, which is not compliant to the installation or mounting instructions suggested in
this manual.
• Do not bore the plastic cover of the antenna, which protects from rain and/or bad weather.
Otherwise your product may result in malfunction.
• A drop or an abrupt shock may damage the antenna.
• Do not open the back or the front cover. Any attempt to repair the antenna by an unqualified
person may cause a hazard.
• Any obstacle (buildings, trees, etc.) may interfere with the signal reception from the satellite.
• Do not paint or add a substance to the antenna cover. This may impede the signal reception
from the satellite.
• The antenna should not be too far away from your satellite receiver. A long cable over 30
meters will reduce the quality of the signal.
• The use of a long cable or not isolated jacks may cause a loss of the signal level.
• Tighten securely all the screws of the antenna once the adjustment is properly made so that it
cannot be disorientated due to the wind and bad weather.
• This product contains two head (LNB) universal. It is absolutely disallowed to add, change or
modify the head of origin.
• For further details or information regarding the installation, please contact your retailer or the
customer service of Clarke-Tech Electronics.
Contents
Safety Instructions
4) Window-sill Mount Assembly ......... 10
5) Stand-alone Assembly .................. 11
How to Prepare the Cable? ................... 11
Orientation of the Antenna .................... 12
Elevation, Azimuth & Skew ................... 12
1) Elevation Angle Calibration ............ 12
2) Azimuth Calibration ....................... 13
3) Skew Adjustment .......................... 13
Tables of Theoretical Values ................. 14
2