ECG SP 4015 Chop&Cut Bedienungsanleitung Seite 7

1
Notes
• There are 2 anti-slip grooves on the blades. If these grooves are not aligned with each other, it means that
you have assembled the blades incorrectly.
• If you do not assemble the blade correctly before use, it may come loose during chopping and damage the
bowl, lid or even cause injury. Make sure you assembled it correctly.
• There is a security lock on the main unit. During operation, place the appliance straight and press the
switch harder. Otherwise, the motor will not start.
1. Attach the anti-slip pad to the bottom of the mixing bowl (Fig. 1).
2. Put the assembled blades in the container. (Mount on a steel shaft mounted on the bottom of the
container). Put the required raw foods in the container (Fig. 2).
Note: Never start the appliance without inserted food (on empty). Never fill the container over the 1500 ml
mark.
3. Close the container with the foods with the lid. Lock the lid by turning it counterclockwise to the "locked"
position (Fig. 3).
4. Insert the motor into the lid so that it fits completely into it (Fig. 4).
It must be firmly tightened!
2 3
Alignment of main and
secondary blades.
4
7