Deleting A User Pin; Programming - Simons Voss Technologies ST10.080070 Kurzanleitung

5. Programming

4.3 Deleting a user PIN

User PINs can be deleted by setting the length of the PIN to 0
characters:
1. Press '0' to switch to programming mode.
2. Enter the 'Master PIN'.
3. Press the button '1' on the PIN code keypad to delete the user PIN 1,
4. Enter '0' for the PIN length.
5 Programming
Using the
1. LSM: right-click on the transponder/PIN code keypad in the locking
LSM software
2. PIN code keypad: Enter 0 0 + Master PIN
3. LSM: Select Programme .
4. PIN code keypad: Press User PIN, e.g. 1 for User PIN 1/Internal
Repeat the process to programme other User PINs into the locking plan.
26 / 108
for example.
The User PIN will then be deleted if the input has been entered
9
correctly.
plan and select Programme .
9 The 'Programme transponder' window opens.
The programming process starts.
9
Transponder 1, as soon as LSM displays the instruction 'Press the
transponder button briefly once now'.
The programming process is now complete.
9
PinCode-Tastatur (offline)
EN