Playing Audio Files In Bluetooth Mode - Makita DMR203 Bedienungsanleitung

Note:
● If 2 Bluetooth devices, pairing for the first time, both
search for the speaker, it will show its availability on
both devices. However, if one device links with this
unit first, then the other Bluetooth device won't find it
on the list.
● If your Bluetooth device is temporarily disconnected
to the speaker, then you need to manually reconnect
your device again to the speaker.
● If "DMR203" shows in your Bluetooth device list but
your device cannot connect with it, please delete
the item from your list and pair the device with
the speaker again following the steps described
previously.
● Optimum Bluetooth streaming range is roughly 10
meters (30 feet) (line of sight) to the speaker but
distance up to 30 meters (100 feet) are possible.
● If Bluetooth connection is lost due to exceeding time
of separation, exceeding the optimum distance,
obstacles or otherwise, reconnecting your device with
the speaker may be necessary.
● Physical obstacles, other wireless devices or
electromagnetic devices may affect the connection
quality.
● Bluetooth connectivity performance may vary
depending on the connected Bluetooth devices.
Please refer to the Bluetooth capabilities of your
device before connecting to the speaker. All features
may not be supported on some paired Bluetooth
devices.

Playing audio files in Bluetooth mode

When you have successfully connected the speaker with
the chosen Bluetooth device you can start to play your
music using the controls on your connected Bluetooth
device.
1. Once playing has started adjust the volume to the
required setting using the Volume buttons on the
speaker or on your enabled Bluetooth device.
2. Use the controls on your Bluetooth device to play/
pause and navigate tracks. Alternatively, control the
playback using Play/Pause, Next track and Previous
track buttons on your speaker.
3. Press and hold the Fast-forward button or Rewind
button to move through the current track. Release the
button when the desired point is reached.
Note:
● Not all player applications or devices may respond to
all of these controls.
● Some mobile phones may temporarily disconnect
from the speaker when you make or receive
calls. Some devices may temporarily mute their
Bluetooth audio streaming when they receive text
messages, emails or for other reasons unrelated to
audio streaming. Such behavior is a function of the
connected device and does not indicate a fault with
the speaker.
● The display will show the track information such as
title, artist, album, etc., when playing in Bluetooth
mode.
Playing a previously-paired Bluetooth
source device
The speaker can memorize up to 8 sets of paired
device, when the memory exceed this amount, the
oldest pairing history will be over written. If your
Bluetooth device already paired with the speaker
previously, the unit will memorize your Bluetooth device
and it attempts to reconnect with a device in memory
which is last connected. If the last connected device is
not available, the speaker will be discoverable.
Disconnecting your Bluetooth device
Press and hold the Bluetooth pairing button for 2-3
seconds until "Pairing" is shown on the display to
disconnect with your Bluetooth device or turn off
Bluetooth on your Bluetooth device to disable the
connection.
Deleting Bluetooth paired device
memory
To clear the memory of all paired devices, press and
hold the Bluetooth pairing button for more than 5
seconds until you hear two beeps.
TRUE WIRELESS STEREO
(TWS) FUNCTION
True wireless stereo (TWS) is a feature that allows one
device to wirelessly connect with another device. You
can use the TWS function to connect it to a second
DMR203 and play your music through two speakers.
Set up the first speaker
1. Make sure the first speaker is in Bluetooth mode and
connect to a Bluetooth device.
2. Press the Plus button, the display will show
will flash on the display. Press the Plus button to
ST
enter the "ST Pair" mode. If no buttons are pressed
for 10 seconds, the speaker will also enter the "ST
Pair" mode. The display will show "ST Pair" and "Pair"
will flash 1 minute.
Set up the second speaker
1. Make sure a second speaker is in Bluetooth mode.
2. Press the Plus button, the display will show
will flash on the display. Press the Plus button to
ST
enter the "ST Pair" mode. If no buttons are pressed
9 ENGLISH
.
ST MULTI
.
ST MULTI