Start Playback - Makita DMR203 Bedienungsanleitung

for 10 seconds, the speaker will also enter the "ST
Pair" mode. When the connection is successful,
will be shown on both displays at the same
L - ST - R
time. The EQ setting will revert to Flat mode (initial
setting).
Note:
Set up the second speaker within 1 minute. If you do not
set it up within 1 minute, the setting of the first speaker
will be canceled.

Start playback

1. Start playback on the connected Bluetooth device
and adjust the volume on the Bluetooth device or one
of the speakers for comfortable listening.
Note:
Volume or EQ (not including Bass/Middle/Treble)
adjustment of one speaker is reflected on the other.
2. Use the controls on your Bluetooth device to play/
pause and navigate tracks. Alternatively, control the
playback using Play/Pause, Next track and Previous
track buttons on the one of the speakers. The display
on the first speaker will show the track information
such as title, artist, album, etc.
3. Press and hold the Fast-forward button or Rewind
button on the one of the speakers to move through
the current track. Release the button when the
desired point is reached.
Switching the audio mode
1. Using two speakers, you can switch between
, and
R - ST - R L - ST - L
2. Press the L/R button on either of the speakers to
change the audio mode.
3. mode: Both speakers play the same sound.
L - ST - R
It is the initial setting.
and
4.
R - ST - R L - ST - L
sound on the right channel, while the other speaker
plays the sound on the left channel for stereo
playback between the speakers.
Disconnecting the TWS Function
Press and hold the Plus button to disconnect the TWS
function.
ENJOYING WIRELESS
PLAYBACK USING
MULTIPLE SPEAKERS
You can enjoy music at the same time by combining up
to 10 devices which are compatible with this function.
Set up the first speaker
1. Make sure the first speaker is in Bluetooth mode and
connect to a Bluetooth device.
mode.
mode: One speaker plays the
2. Press the Plus button, the display will show
3. Select
MULTI
flash on the display. Press the Plus button to enter
"MULTI Pair" mode. If no buttons are pressed for 10
seconds, the speaker will also enter the "MULTI Pair"
mode. The display will show "MULTI Pair" and "Pair"
will flash 1 minute.
C o n n e c t t h e s e c o n d a n d m o r e
speakers
1. Make sure the multiple speakers are all in Bluetooth
mode.
2. Press the Plus button, the display will show
3. Select
MULTI
flash on the display. Press the Plus button to enter
the "MULTI Pair" mode. If no buttons are pressed for
10 seconds, the speaker will also enter the "MULTI
Pair" mode. When the connection is successful, the
display will be shown "PARENT" (the master speaker)
on the first speaker and the other displays are all
shown "CHILD" (the secondary speaker). The EQ
setting will revert to Flat mode (initial setting).
Note:
When connecting the second and more speakers,
connect it within 1 minute after setting the first speaker.
After 1 minute, the speaker cannot be connected.
Add a new secondary speaker
If you want to add another speaker after connecting,
operate below steps:
L - ST - R
1. Make sure the new speaker is in Bluetooth mode.
2. Press the Plus button on the master speaker, the
display will show "MULTI ADD" and "ADD" will flash
on the display.
3. Press the Plus button on the new speaker, the display
will show
4. Select
MULTI
flash on the display. Press the Plus button to enter
the "MULTI Pair" mode. If no buttons are pressed for
10 seconds, the speaker will also enter the "MULTI
Pair" mode. When the connection is successful,
"CHILD" (the secondary speaker) will be displayed
on the new speaker. The EQ setting will revert to Flat
mode (initial setting).
Start playback
1. Start playback on the connected Bluetooth device
and adjust the volume on the Bluetooth device or
on the speakers for comfortable listening. The same
music is played from all speakers.
Note:
Only for the master speaker, the volume or EQ (not
including Bass/Middle/Treble) adjustment will be
synchronized with the other speakers. For other
10 ENGLISH
by pressing the L/R button.
by pressing the L/R button.
.
ST MULTI
by pressing the L/R button.
.
ST MULTI
will
MULTI
.
ST MULTI
will
MULTI
will
MULTI