Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
Headset Hanger with USB 3.0 Hub/Audio Adaptor
Item No. 2142417
Intended Use
The product is a headset stand hub with cable hooks to reduce cable clutter and help free up desktop space.
Non-skid silicone pads help prevent scratching to delicate surfaces, and a padded headset hanger helps
protect your headphones from damage. The hub increases connectivity with three USB 3.0 ports, a 3.5mm
headphone output, and a 3.5mm microphone input.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
result in short circuits, fires, or other hazards. Read the instructions carefully and store them in a safe place.
Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery Content
•
Headset Hanger
•
USB cable
•
Operating instructions
Up-to-date Operating
Instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation
mark in the triangle is used to indicate
important
information
in
operating instructions. Always read this
information carefully.
The arrow symbol indicates special
information and advice on operation.
Safety Instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
•
Base of stand may leave marks on delicate
surfaces
•
The device is not a toy. Keep it out of the reach
of children and pets.
Operating Elements
1
4 5
6
7
8
9
•
Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
•
Protect
the
appliance
temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and
solvents.
•
Do not place the product under any mechanical
stress.
•
If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
these
ambient conditions or
- has
been
subjected
transport-related stresses.
•
Please handle the product carefully. Jolts,
impacts or a fall even from a low height can
damage the product.
•
Consult an expert when in doubt about the
operation, safety or connection of the appliance.
•
Maintenance, modifications and repairs must
only be completed by a technician or an
authorised repair centre.
•
If you have questions which remain unanswered
by these operating instructions, contact our
technical support service or other technical
personnel.
•
Also observe the safety and operating
instructions of any other devices which are
connected to the product.
1 Headset hanger
2 Cable hook
3 Cable hook
4 USB 3.0 port (not shown)
5 USB 3.0 port (not shown)
6 USB 3.0 port
7 LED power indicator light
2
8 3.5 mm audio output (green)
9 3.5 mm microphone input (red)
10 Power ON/OFF button
11 5 V/DC USB input
3
10 11
Setup
Push the stand into the slot in the base until it
"clicks" into place.
Operation
•
USB 3.0 port speeds and output current are shared between the total number of connected devices.
The speed and output current also depend on the source USB port output. See section "Technical Data".
•
Pressing the power button (10) will supply power to all three USB ports (4), (5), (6), the LED power
indicator (7) will
from
extreme
Connect USB devices into USB ports (4), (5),
and (6) on the front of the base.
to
any
serious
Use the cable hooks (2) and (3) on the back of the
stand to tidy up long cables.
Care and Cleaning
•
Disconnect the product from the mains before each cleaning.
•
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can
cause damage to the housing and malfunctioning.
•
Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines. You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical Data
Input voltage/current ............................. 5 V/DC, 900 mA via USB type-A
USB ports ............................................. 3x USB 3.0 (superspeed)
USB cable ............................................. Type-A (male to male)
USB standard ....................................... 3.0, 2.0, 1.1
Audio output ......................................... 3.5 mm
Microphone input .................................. 3.5 mm
Compatible OS ..................................... Mac, Windows
Operating conditions ............................. -10 to +45 ºC, 20 – 90 % rH (non-condensing)
Storage conditions ................................ -20 to +75 ºC, 20 – 90 % rH (non-condensing)
Dimensions (W x H x D) ....................... 130 x 270 x 155 mm
Weight .................................................. approx. 410 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
Using the included cable, connect to the 5 V/DC
input (11) to
suitable power supply.
light blue to indicate that power is on.
Connect your headset or speakers to the
3.5mm audio output (8), or a microphone to the
microphone input (9).
Hang your headset over the hanger (1).
Type A connection
max. 900 mA (total output)
max. 5 Gbit/s (total output)
, Linux
®
Mobile devices (charging only)
a USB port on your computer or a
*2142417_v2_1019_02_dh_m_en
Werbung
