Interconnections; Multiplexers - Bosch DVR1C1161 Installationshandbuch

DVR1C1161 | Installation Manual | Chapter 2

2.4 Interconnections

The DVR can be connected to a wide range of
multiplexers, quads or directly to a camera.

2.4.1 Multiplexers

The drawing below shows how to connect a multiplexer
to the DVR.
• Connect the monitor to the BNC socket marked
Monitor Out on the rear of the DVR.
• Connect the main monitor output of the multiplexer
to the BNC socket marked Monitor In on the rear of
the DVR.
Multiplexer
Power switch
Power
Off
AC 100-240
100-240 Vac
Bosch Security Systems | 2004-6
All manuals and user guides at all-guides.com
MON B MON A VCR IN VCR OUT
Audio Mux main Video
Monitor In S-Video In
In
In1 In2
Out1 Out2 Monitor Out Out Out 1
Monitor
• Connect the VCR output of the multiplexer to the
BNC socket marked Video In on the rear of the
DVR.
• Connect the VCR input of the multiplexer to the
BNC socket marked Video Out on the rear of the
DVR.
• To synchronise switching with the multiplexer
connect the VEXT and GND connections on the
rear of the unit to the connector of the multiplexer.
When the connections are made, refer to the system
menu to select the type of multiplexer you are using.
Cameras
1 2 3 4 5 6
IR remote
control eye
RS-232
connector
connector
RS 232 Remote Control
Looping out
Out 2
GND
EN | 9
LAN
VEXT
Network connector