Putting The Device Into Operation; Programme Settings - Emos P5606OT Bedienungsanleitung

OpenTherm connection
OT OpenTherm connection
OT OpenTherm connection

Putting the Device into Operation

Remove front cover of the transmitter and insert 2× 1.5 V AA alkaline
batteries.
Do not use 1.2 V rechargeable batteries.
Insertion of batteries starts the thermostat and activates the display.
If the thermostat is not working properly, please check the polarity of the
batteries, and their state of charge.
Factory Preset Programmes
This programmable indoor thermostat was designed to be easy to use
and require minimal user input. The preset times and temperatures will
suit the majority of users (see the table below). If you wish to use a
factory preset programme, move the slider switch to AUTO, which puts
the thermostat into automatic mode.
Table of Preset Programmes
Time
P1 6:00
P2 8:00
P3 12:00
P4 14:00
P5 16:30
P6 22:30

Programme Settings

1. Move the slider to PROG until the workdays symbol starts flashing
(„MO TU WE TH FR").
2. Press + or – to select mode settings: Workdays / Weekend mode
(„MO TU WE TH FR" flashes or „SA SU" flashes), Week mode („MO
TU WE TH FR SA SU" flashes), 24 hour mode („MO", „TU", „WE", „TH",
„FR", „SA", „SU" flash separately).
Temperature
20 °C
15 °C
15 °C
15 °C
21 °C
15 °C
5
Time Temperature
P1 7:30 20 °C
P2 9:30 20 °C
P3 11:30 20 °C
P4 13:30 20 °C
P5 16:30 21 °C
P6 22:30 15 °C