Epson EMP-S3 Aufstellungsanleitung Seite 4

Turning on and Projecting
• When using the "Direct
Power ON" feature, the
power turns on when the
power cable is connected.
• When using above an
altitude of about 1500 m,
set the "Fan Speed" to
"High".
User's Guide "Extended
Menu"
Reading the Indicators
Orange
In this mode, you can unplug
the power cable.
Green
In this mode pressing
no effect.
Green
Do not unplug the power
cable.
4
Downloaded from www.Manualslib.com
Remote Control
Control Panel
Power Indicator
Flashing
Lit
Standby
Press to
start projecting.
Warming up
Wait for a short
time (about 30
seconds).
has
Projecting
manuals search engine
(Accessory
Power Cable)
● No image is projected ●
■ For notebooks and computers with liquid
crystal displays
Change the computer's
output source. Hold
down the key and
press the appropriate
key (the one usually
labelled / ). After
changing the setting,
wait a few seconds for
projection to start.
Computer's "User's
Guide"
* I f t h e i m a g e i s n o t
projected, press
■ For video equipment
Start playback then
press .
* For video equipment,
press "play" to star t
playback.
Examples
NEC
Panasonic
SOTEC
HP
TOSHIBA
IBM
SONY
DELL
FUJITSU
Macintosh Set mirror setting
or display
detection.
.