Classic Hard Wax; Window Cleaner Cw 1:100 - Porsche Classic Pflegeanleitung

Classic hard wax

Paint bleaches out over time through exposure
to the sun, becomes unsightly and must
be protected lastingly against damaging
environmental influences like UV radiation, rain,
insects, bird droppings and the like. Polished
paint should therefore subsequently be sealed
and finished with high-quality hard wax. This
was our incentive for creating a special hard
wax with a unique signature. Porsche Classic
hard wax combines perfect protection with easy
processing. The natural and fine consistency of
the wax will excite right when you start handling
it. It contains high-grade Brazilian carnauba
wax (the hardest natural wax) as well as special
Nano polymers. This ensures an extreme gloss,
long-term protection with a dirt-repellent effect
and very good roll-off characteristics. Porsche
Classic hard wax was designed to meet the
special requirements of all paint generations
used by Porsche. Before you apply the wax to
your car, clean the paint with Porsche shampoo
and Porsche cleaning clay. Depending on the
condition of the paint, you can also refurbish
your classic with Porsche Classic paintwork
polish.
Notes:
• Ensure good lighting. Use a mobile lamp for
perfect results.
• Avoid direct sun light and heated surfaces.
• Ensure a clean workplace, preferably in a
garage or hall.
• We recommend processing sections going
from top to bottom. In other words, start with
the roof and go from the hood to the tailgate
all the way to the doors and sides.
20
Application:
Apply the hard wax on the dry paint as thinly
as possible with circular movements using the
enclosed pad. Process an area of about
50 x 50 cm. Allow the wax film to work for
at least 20 minutes. Polish the area with
gentle circular movements using the enclosed
microfiber cloth. Flip over the cloth several
times.

Window cleaner CW 1:100

Dirt like insect residue, dust, silicone, wax,
diesel soot and the like on the windscreen lead
to dangerous glare and grease films especially
during rain and at dusk. Your windscreen washer
removes the dirt only superficially. It leaves
a water-repellent, hydrophobic, milky layer
that diffuses incoming light – especially from
oncoming vehicles – thus causing a glare for
the driver. Porsche window cleaner CW 1:100
is used to quickly remove soiling and dirt. It
safely and quickly removes all stubborn glare
and grease films on the windscreen. Thanks
to the anti-limescale formula, the screenwash
effectively prevent the clogging of the washer
nozzles from precipitation and the formation of
residue in the washer tank.
Notes:
• Porsche window cleaner CW 1:100 can be
mixed with all conventional antifreeze agents
and prevents stress cracks on the headlight
diffusers.
• The antifreeze portion must not exceed 50 %.
Application:
Slightly open the sealing cap of the 250 ml
bottle. Pressing the bottom part of the bottle
will fill the dosing head with 25 ml concentrate.
Unscrew the sealing cap completely and add the
dosing head content to the screenwash water.
Dilute Porsche window cleaner CW 1:100 at the
ratio 1:100. The content of the dosing head
(25 ml) will produce 2.5 l of cleaning fluid.
Winter use:
Porsche window cleaner CW 1:100 can be
mixed with all conventional antifreeze agents in
the following sequence: 1. antifreeze, 2. water,
3. Porsche window cleaner CW 1:100. Dose
Porsche window cleaner CW 1:100 at the ratio
1:50 (2 dosing heads in 2.5 l washing water).