Inhaltsverzeichnis
Werbung
Operation
UK
The UK VuDome Auto is preset to Astra 2, this means your system is ready to search for
your favourite UK channels. (The European VuDome Auto is preset to Astra 1, this means
European users can also immediately search for their favourite channels.)
In most cases your pre-set satellite will be the one you wish to search for, in this case,
please skip to the SCAN section now (turn over).
If you would like to change the satellite which your VuDome Auto searches for please use
the following process:
1. Hold down POWER and SCAN simultaneously for 3 seconds or until a SAT SCAN &
COAX light begins to flash.
2. You have now entered satellite selection mode. You can now scroll between the 4
satellites by pressing the SCAN button. You will see the SAT SCAN light will move,
corresponding to the new satellite you have selected (see table).
3. Once you have selected your satellite, again, simultaneously hold down POWER and
SCAN for 3 seconds. The lights will stop flashing.
4. You have now exited satellite selection mode and your new satellite is ready to be
searched.
Note:
This will now remain the pre-set satellite on the control box until this process is repeated.
Page 11
Werbung
Inhaltsverzeichnis
