contact the contact address provided on
the reverse of these instructions.
▶
If you require spare parts for mainten-
ance or repair work, use only the spare
parts that are permitted for the product.
9 Decommissioning
9.1 Permanently
decommissioning the product
1. Disconnect the product from the power
supply by switching off all power sup-
plies at all poles (electrical partition
with a contact opening of at least
3 mm, e.g. fuse or line protection
switch).
2. Remove the product and all of its com-
ponents.
10 Recycling and disposal
Disposing of the packaging
▶
Dispose of the packaging correctly.
▶
Observe all relevant regulations.
11 Customer service
The contact details for our customer ser-
vice are provided in the Country Specifics
appendix or on our website.
0020237953_01 Installation instructions
Decommissioning 9
29