Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
__________________________________________________________________________________
comparable parts to be injected into the
product! This leads automatically to damage of
heating conductor or other electrical parts and
protection devices! Perilous injuries can result
from this type of misuse.
ATTENTION! HOT!
These products contain electrical heating
elements. Never touch in case of hot surface of
the product or when the product is in operation.
This affects also all metallic parts, which can
reach high temperature during operation. There
is danger of combustion.
INFLAMMATION AND EXPLOSION RISK!
The product is not explosion-proof. It should
never be integrated into tempering processes
where liquids handled may support explosions.
This covers also applications where gas/air-
mixtures may occur. The product must not be
used to heat explosive media or those
developing explosive gases when heated. The
product must be installed only outside of
hazardous locations.
General Product Information
The products consist of resistance heating wires
embedded in polymer reinforced glass-fiber
fabric materials for industrial use. Depending on
the requirements they are designed with the
following features:
- resistance heating elements in various alloys
- Layers of polymer reinforced glass-fiber
fabrics
- Fiberglass insulation materials
- Velcro or other fixation types for installation
- Built in thermostats, digital controllers
- various operating voltages
- various performance ratings
They are used to heat-up, maintain and
compensate heat losses on plastic or metal
drums. The maximum admissible product
temperature varies in design and in the different
insulation material. The maximum achievable
withstand temperature, however, depends on
the specific operating conditions. It may be
influenced by the heat conductivity of the
materials and media to be heated as well as by
the throughput, the ambient temperature, the
insulating material and the insulation thickness.
ISOPAD offers standard types and special
versions tailored individually to the application.
Please contact us for more information. (see last
page for contact information)
Note:
For individual specifications please refer to the
product label or type plate. In the case of
installation difficulties or special requirements it
is recommended to discuss and agree suitable
installation procedures. In case of doubt or if
necessary please contact us. (see last page for
contact information)
Additional Safety Instruction
(product related)
Attention!
When using electric surface heating equipment,
basic safety precautions should be followed in
order to prevent the occurrence of burns,
electric shock, fire or injury to persons or
animals.
The following safety notes have to be followed:
- The products are not suitable for use in
applications where they may be subject to
aggressive chemicals.
- Prior to connecting the heating to mains,
please ensure that the mains voltage
matches that indicated on the label.
- Check the suitability of the product for the
maximum withstand temperature both
energized and de-energized (refer to the
Technical Data in this manual and on the
label).
- Care must be taken not to damage the
product during installation.
- The product is electrical equipment. It must
therefore be operated only by properly
trained staff.
5 |
P a g e - S e i t e
Werbung
Inhaltsverzeichnis
