Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
__________________________________________________________________________________
ATTENTION! HOT!
These products contain electrical heating
elements. Never touch in case of hot surface
of the product or when the product is in
operation. This affects also all metallic parts,
which can reach high temperature during
operation. There is danger of combustion.
INFLAMMATION AND EXPLOSION RISK!
The product is not explosion-proof. It should
never be integrated into tempering processes
where
liquids
handled
explosions. This covers also applications
where gas/air-mixtures may occur. The
product must not be used to heat explosive
media or those developing explosive gases
when heated. The product must be installed
only outside of hazardous locations.
General Product Information
The products consist of resistance heating
wires embedded in polymer reinforced glass-
fiber fabric materials for industrial use.
Depending on the requirements they are
designed with the following features:
-
Self-regulating heating element
-
Layers of polymer reinforced glass-
fiber fabrics
-
Fiberglass insulation materials
-
Velcro or other fixation types for
installation
-
various operating voltages
-
various performance ratings
They are used to heat-up, maintain and
compensate heat losses on most common gas
bottles. The maximum admissible product
temperature varies in design and in the
different insulation material. The maximum
achievable withstand temperature, however,
depends on the specific operating conditions.
It may be influenced by the heat conductivity
of the materials and media to be heated as
well as by the throughput, the ambient
may
support
temperature, the insulating material and the
insulation thickness.
ISOPAD offers standard types and special
versions
tailored
application. Please contact us for more
information. (see last page for contact
information)
Note
For individual specifications please refer to
the product label or type plate. In the case of
installation difficulties or special requirements
it is recommended to discuss and agree
suitable installation procedures. In case of
doubt or if necessary please contact us. (see
last page for contact information)
Additional Safety Instruction
(product related)
Attention!
When
using
electric
equipment, basic safety precautions should be
followed in order to prevent the occurrence of
burns, electric shock, fire or injury to persons
or animals.
The following safety notes have to be
followed:
-
The products are not suitable for use
in applications where they may be
subject to aggressive chemicals.
-
Prior to connecting the heating to
mains, please ensure that the mains
voltage matches that indicated on the
label.
-
Check the suitability of the product for
the maximum withstand temperature
both energized and de-energized
(refer to the Technical Data in this
manual and on the label).
-
Care must be taken not to damage the
product during installation.
-
The product is electrical equipment. It
must therefore be operated only by
properly trained staff.
individually
to
the
surface
heating
5 |
P a g e - S e i t e
Werbung
Inhaltsverzeichnis
